Small Solar Photovoltaic Systems and Small Electrical Energy Storage
Start Date: 1st September 2026
- Length 8 Weeks
- Study Part-Time
- Location Green Technology Centre
- Price £250
Qualification Gained
City and Guilds Level 3 Electric Vehicle Charging Installations (2921-31) and BPEC Solar PV Level 3 (BPEC 0018)
Levels ExplainedMore about the course
City and Guilds Level 3 Electric Vehicle Charging Installations (2921-31)
This qualification is aimed at learners who wish to upskill or learn how to install (smaller) EV Charging systems at home or in the commercial industry. The 2921-31 qualification is designed for qualified competent electricians who wish to update their current skills to install and maintain EV charging units in domestic or small commercial premises. The course includes the Design and Installation of Domestic and Small commercial electric vehicle charging installations. This qualification is suitable for candidates looking to become an approved EV Charging Point Installer. The Course is intended for practicing electricians who hold a Level 3 qualification in Electrotechnical Installation or equivalent.
BPEC Solar PV Level 3 (BPEC 0018)
This course is intended for learners wishing to upskill or increase their knowledge on Solar Photovoltaic systems. As the need for renewable energy increases, now is a great opportunity for practicing electricians to increase their current knowledge and understanding of Solar PV. This course is a nationally recognised certification in the design, installation and maintenance of small grid tied Photovoltaic systems. Learners must be competent or practicing electricians and hold an NVQ Level 3 Electrical Qualification (or equivalent) or Approved Electrician Card and BS 7671: 2018 Requirements for Electrical Installations (18th Edition) qualification. During the time on this course, learners will gain knowledge in the following areas
- AC & DC electrical theory & practical for Solar installation
- Roofing Structures
- Solar PV Panel Mounting
- Installation of roof fixings
How often does this course run?
This course will run one evening a week
Entry requirements:
You will be a fully qualified electrician
What will I achieve?
On completion of the course, you will receive a City and Guilds Level 3 Electric Vehicle Charging Installations (2921-31) and a BPEC Solar PV Level 3 (BPEC 0018)
What will I learn?
How is the course taught?
How am I assessed?
Course costs:
If you are aged 19+ the cost of the course will depend on your circumstances. Our support pages can help you determine your suitability.
This course may be free or discounted if you meet certain criteria. Check our eligibility guide to find out more.
Get in Touch
Meet our tutors and students
Construction
Gallery
What can I do with a qualification in Small Solar Photovoltaic Systems and Small Electrical Energy Storage?
Daily tasks:
- Visits and advises clients on the use and servicing of electrical and electronic systems and equipment.
- Diagnoses and detects faults and implements procedures to maintain efficient operation of systems and equipment.
- Plans installation methods, checks completed installation for safety and controls or undertakes the initial running of the new electrical or electronic equipment or system.
- Sets up equipment, undertakes tests, takes readings, performs calculations and records and interprets data.
- Plans and prepares work and test schedules based on specifications and drawings.
Powered by EMSI
Daily tasks:
- Examines electrical plant or machinery, domestic appliances and other electrical assembly for faults using test equipment and replaces worn parts and faulty wiring.
- Installs electrical plant, machinery and other electrical fixtures and appliances such as fuse boxes, generators, light sockets etc..
- Assembles parts and sub-assemblies using hand tools and by brazing, riveting or welding.
- Cuts, bends and installs electrical conduit.
- Selects, cuts and lays wires and connects to sockets, plugs or terminals by crimping, soldering, brazing or bolting.
- Examines drawings, specifications and wiring diagrams to determine the method and sequence of operations.
Powered by EMSI
Daily tasks:
- Levels, aligns and embeds stone in mortar and faces brick, concrete or steel frame with stone to make and repair structures.
- Uses hand and power tools to shape, trim, carve, cut letters in and polish stone.
- Spreads mortar on foundations and bricks, and places, levels and aligns bricks in mortar bed.
- Marks and cuts stone using hammers, mallet and hand or pneumatic chisels.
- Examines drawings, photographs and specifications to determine job requirements.
Powered by EMSI
Daily tasks:
- Maintains and repairs woodwork and fittings.
- Checks accuracy of work with square, rule and spirit level.
- Aligns and fixes prepared wood pieces by screwing, nailing, gluing and dowelling to form frames, shop fronts, counter units, decking, theatrical sets, furniture, small wooden craft, scale models and wooden templates.
- Selects and measures appropriate wood and cuts, shapes and drills to specification using saws, planes, chisels and other power or hand tools.
- Examines drawings and specifications to determine job requirements.
Powered by EMSI
Daily tasks:
- Stains, waxes and french polishes wood surfaces by hand.
- Mixes adhesive or removes self-adhesive backing and positions covering material on wall, matching up patterns where appropriate and removing wrinkles and air bubbles by hand or brush.
- Applies primer, undercoat and finishing coat(s) using brush, roller, or spray equipment.
- Prepares surfaces by cleaning, sanding and filling cracks and holes with appropriate filler.
- Erects working platform or scaffolding up to five metres in height.
Powered by EMSI
Daily tasks:
- Checks fire and safety equipment for adequate functioning.
- Undertakes minor repairs and notifies owner of need for major repairs.
- Controls heating, lighting and security systems.
- Supervises and/or undertakes the cleaning and maintenance of premises.
- Locks and unlocks doors and entrances at appropriate times.
Powered by EMSI
What can I do with a qualification in Small Solar Photovoltaic Systems and Small Electrical Energy Storage?
Electrical and Electronics Technicians
Daily tasks:
- Visits and advises clients on the use and servicing of electrical and electronic systems and equipment.
- Diagnoses and detects faults and implements procedures to maintain efficient operation of systems and equipment.
- Plans installation methods, checks completed installation for safety and controls or undertakes the initial running of the new electrical or electronic equipment or system.
- Sets up equipment, undertakes tests, takes readings, performs calculations and records and interprets data.
- Plans and prepares work and test schedules based on specifications and drawings.
Powered by EMSI
Electricians and Electrical Fitters
Daily tasks:
- Examines electrical plant or machinery, domestic appliances and other electrical assembly for faults using test equipment and replaces worn parts and faulty wiring.
- Installs electrical plant, machinery and other electrical fixtures and appliances such as fuse boxes, generators, light sockets etc..
- Assembles parts and sub-assemblies using hand tools and by brazing, riveting or welding.
- Cuts, bends and installs electrical conduit.
- Selects, cuts and lays wires and connects to sockets, plugs or terminals by crimping, soldering, brazing or bolting.
- Examines drawings, specifications and wiring diagrams to determine the method and sequence of operations.
Powered by EMSI
Bricklayers and Masons
Daily tasks:
- Levels, aligns and embeds stone in mortar and faces brick, concrete or steel frame with stone to make and repair structures.
- Uses hand and power tools to shape, trim, carve, cut letters in and polish stone.
- Spreads mortar on foundations and bricks, and places, levels and aligns bricks in mortar bed.
- Marks and cuts stone using hammers, mallet and hand or pneumatic chisels.
- Examines drawings, photographs and specifications to determine job requirements.
Powered by EMSI
Carpenters and Joiners
Daily tasks:
- Maintains and repairs woodwork and fittings.
- Checks accuracy of work with square, rule and spirit level.
- Aligns and fixes prepared wood pieces by screwing, nailing, gluing and dowelling to form frames, shop fronts, counter units, decking, theatrical sets, furniture, small wooden craft, scale models and wooden templates.
- Selects and measures appropriate wood and cuts, shapes and drills to specification using saws, planes, chisels and other power or hand tools.
- Examines drawings and specifications to determine job requirements.
Powered by EMSI
Painters and Decorators
Daily tasks:
- Stains, waxes and french polishes wood surfaces by hand.
- Mixes adhesive or removes self-adhesive backing and positions covering material on wall, matching up patterns where appropriate and removing wrinkles and air bubbles by hand or brush.
- Applies primer, undercoat and finishing coat(s) using brush, roller, or spray equipment.
- Prepares surfaces by cleaning, sanding and filling cracks and holes with appropriate filler.
- Erects working platform or scaffolding up to five metres in height.
Powered by EMSI
Caretakers
Daily tasks:
- Checks fire and safety equipment for adequate functioning.
- Undertakes minor repairs and notifies owner of need for major repairs.
- Controls heating, lighting and security systems.
- Supervises and/or undertakes the cleaning and maintenance of premises.
- Locks and unlocks doors and entrances at appropriate times.
Powered by EMSI
Good to know
Part-time Funding
Application Tips for 19+ Courses
Student Support
Travel and Transport
What's happening?
Events
May Open Evening
Kidderminster College
Wednesday 13th May 2026
5:30pm - 7:30pm
Course Added
This course has now been added to your basket. Please click below to apply now or contine browsing.
Apply Now